 |
|||
|
|
|||
|
Page Title:
MAINTENANCE OF FINAL DRIVE ASSEMBLY. |
|
||
| ||||||||||
|
|
 TM 9-2350-238-20-1
9
Install new nonmetallic seal (11), oil filler
Install double angle bracket (1) on
1
strainer element (12), and oil filler gage
transmission (2) and secure with two
rod-cap (13) in transmission (2).
machine bolts (3).
Install new preformed packing (14) on filter
10
2
If removed, install new identification
element (15).
marker (4) on double angle bracket (1).
Install filter element (15) and new self-
11
Install drain cock (5) and hexagon plain
3
Iocking nut (16) on transmission filter cap
nut (6) on double angle bracket (1).
(17) .
Tighten nut.
Install transmission oil pressure fluid filter
12
Install bushing (7) in transmission (2).
4
(18), new Iockwasher (19), and hexagon
head capscrew (20) in transmission (2).
Install adapter (8) in bushing (7).
5
Install cover (21), and secure with three
13
Install straight adapter (9) in drain cock (5).
6
new Iockwashers (22) and three hexagon
head capscrews (23).
Install metal tube assembly (10) and
7
connect to adapter (8).
Connect metal tube assembly (10) to
8
straight adapter (9) in drain cock (5).
2-129. MAINTENANCE OF FINAL DRIVE ASSEMBLY.
c. Reassembly/Installation
a. Removal/Disassembly
This task covers:
b. Inspection/Repair
INITIAL SETUP
Matetials/Parts
Tools and Special Tools
Compressed air
Automotive maintenance and repair shop
Dry cleaning solvent (item 16, appx C)
equipment: organizational maintenance,
Sealing compound (item 39, appx C)
common no. 1 (less power) (item 80,
Self-locking bolt (24)
Socket (3/4 in. drive, 1 in.)
References
Torque wrench (0 to 600 ft-lb)
TM 9-2350-238-24P-1
Wire brush
Final drive lifting sling (item 24, appx G)
Equipment Conditions
Headless shoulder pin (2) (item 16,
2-873 Tracks removed
2-384 Powerplant removed
Hexagon head capscrew (3) (item 22,
Hoist
Sling (item 82, appx B)
2-761
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals