Removal - TM-9-2350-238-20-10760

TM 9-2350-238-20-1

2-120. MAINTENANCE OF MASTER RELAY TO BULKHEAD DISCONNECT SPECIAL

CABLE ASSEMBLY (CONT).

2 Tag and disconnect plug connector (1)

from bulkhead disconnect to batteries.

Failure to remove or disconnect

3 Tag and disconnect plug connector (2)

batteries before removing or installing

from master relay.

any electrical wiring harness or lead

may result in injury or damaged

4 Remove master relay to bulkhead

equipment.

disconnect electrical lead (3) from hull

through driver's compartment.

1 Wiring harnesses and leads are secured to

the hull and components with loop clamps,

straps, clips, ground screws, etc. Remove

only the hardware which secures the

wiring harness or lead being removed.

For disassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

3 Electrical wire is a manufactured item,

1 Inspect for broken, damaged, or missing

parts.

4 Repair is by replacement of authorized

2 If damaged or missing, replace marker

bands. Etch or stamp lead number on

parts (TM 9-2350-238-24 P-1).

new band.

2-734