MAINTENANCE OF AERATION DETECTOR BRANCHED WIRING HARNESS.

TM 9-2350-238-20-1

2-118. MAINTENANCE OF AERATION DETECTOR BRANCHED WIRING HARNESS.

a. Removal

b. Inspection/Repair

This task covers:

c. Installation

INITIAL SETUP

General Safety Instructions

Matetials/Parts

References

Failure to remove or disconnect

TM 9-2350-238-24P-1

batteries before removing or installing

any electrical wiring harness or lead

Equipment Conditions

may result in injury or damaged

2-640 Batteries disconnected

equipment.

2-384 Powerplant removed

ground screws, etc. Remove only the

hardware which secures the wiring

harness or lead being removed.

Failure to remove or disconnect

batteries before removing or installing

Tag and disconnect shell connector (1)

any electrical wiring harness or lead

from horn relay.

may result in injury or damaged

equipment.

Tag and disconnect shell connector (2)

from aeration detector lead and diode

1 Wiring harnesses and leads are secured to

assembly (3).

the powerplant with loop clamps, straps,

2-730