 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-114. MAINTENANCE OF RIGHT AND LEFT DISCONNECT TO HEADLAMP WIRING
HARNESSES (CONT).
4 Electrical wire and rod are manufactured
1 Inspect for broken, damaged, or missing
items, refer to appendix D.
parts.
5 Repair is by replacement of authorized
2 If damaged or missing, replace marker
parts (TM 9-2350-238-24P-1).
bands. Etch or stamp lead number on
new band.
3 For repair of cable terminal and shell
connectors, refer to general maintenance,
REASSEMBLY
6 Install electrical lead 19 through pin hole G
1 Install spring tension clip (1), two new lock-
in electrical insert (7) and rubber bushing
washers (2), and two machine screws (3)
(6).
on threaded base (4).
7 Install electrical lead 18 through pin hole A
Install new nonmetallic seal (5) on
2
in electrical insert (7) and rubber bushing
threaded base (4).
(6).
Align rubber bushing (6) with keyway in
3
8 Install electrical lead 17 through pin hole B
threaded base (4), and install rubber
in electrical insert (7) and rubber bushing
bushing in threaded base.
(6).
Install electrical insert (7) in threaded base
4
9 Install electrical lead 91 through pin hole C
(4). Install rod (8) in electrical insert.
in electrical insert (7) and rubber bushing
(6).
Solder electrical wire (9) to electrical
5
contacts (10) with solder per TB SIG-222.
2-722
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals