|
|
TM 9-2350-238-20-1
29
Bond new headlamp cover nonmetallic
seal (77) in groove of headlamp cover
(64), using adhesive.
30
Install new rubber headlight seal (78) on
clear light lens (79).
31
Apply antiseize compound to threads of
three machine screws (80). Install clear
light lens (79) with attached rubber
headlight seal, lens retainer (81), three
new lockwashers (82), and three machine
screws in headlamp cover (64).
Install new rubber headlight seal (83) on
32
infrared filter light lens (84).
33
Apply antiseize compound to threads of
three machine screws (85). Install infrared
filter light lens (84) with attached rubber
headlight seal, lens retainer (86), three
new lockwashers (87), and three machine
screws in headlamp cover (64).
Install new spring pin (88) in light housing
34
(7).
Apply a light coat of aircraft grease to
35
mounting surface of headlamp cover (64),
and install headlamp cover on light
housing (7), using spring pin (88) as a
guide.
Apply antiseize compound to threads of
36
four fillister head screws (89). Install four
new lockwashers (90) and four fillister
head screws.
2-613
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |