REASSEMBLY (Cont) - TM-9-2350-238-20-10638

TM 9-2350-238-20-1

2-80. MAINTENANCE OF HEADLIGHT ASSEMBLY (CONT).

REASSEMBLY (CONT)

Apply a coat of sealing compound (item 37, appx C) to mounting surface of new gasket (65),

and install gasket on headlamp blackout lamp guard (66).

NOTE

Carefully position gaskets to prevent light leakage around headlamp blackout light lens.

Apply antiseize compound to threads of two machine screws (67). Install headlamp blackout

light lens (68), new gasket (69), light filter (70), new gasket (71), blackout lens retainer (72), two

new lockwashers (73), and two machine screws on headlamp blackout lamp guard (66).

Bond new blackout shield nonmetallic seal (74) in groove of headlamp blackout lamp guard (66)

using adhesive.

Apply antiseize compound to threads of three machine screws (75). Apply a light coat of

to mounting surface of headlamp blackout lamp guard (66), and install headlamp

blackout lamp guard, three new lockwashers (76), and three machine screws on headlamp

cover (64).

2-612