|
|
TM 9-2350-238-20-1
11 Remove two machine screws (28), two
lockwashers (29), blackout marker light
instrument bezel (30), blackout marker
inner nonmetallic seal (31), blackout
marker lamp filter (32), blackout marker
clearance light lens (33), and nonmetallic
seal (34) from headlamp cover (3).
12 Pull two incandescent lamps (35) with
shock cushion gaskets (36) from light
housing (4). Disconnect each
incandescent lamp from each lamp
electrical insert (37).
13 Remove two shock cushion gaskets (36)
from two incandescent lamps (35).
NOTE
Before disconnecting electrical
leads, ensure that they are
adequately identified for
reassembly.
Step 14 is written for one lamp
electrical insert, but applies to
both lamp electrical inserts.
14 Disconnect electrical leads from three
electrical clips (38). Remove three
electrical clips and three headlamp
connector electrical clips (39) from lamp
electrical insert (37). Remove lamp
electrical insert.
15 Remove two machine screws (40) and two
lockwashers (41) connecting ground leads
of two blackout lamp socket assemblies
(42 and 43), two cable assemblies (44),
and electrical lead 91 (45) to light housing
(4). Remove two cable assemblies.
2-603
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |