|
|
TM 9-2350-238-20-1
2-80. MAINTENANCE OF HEADLIGHT ASSEMBLY (CONT).
DISASSEMBLY (CONT)
Remove three machine screws (5), three
3
lockwashers (6), lens retainer (7), and
clear light lens (8) with attached rubber
headlight seal (9) from headlamp cover
(3).
Remove rubber headlight seal (9) from
4
clear light lens (8).
Remove three machine screws (10), three
5
lockwashers (11), lens retainer (12), and
infrared filter light lens (13) with attached
rubber headlight seal (14) from headlamp
cover (3).
Remove rubber headlight seal (14) from
6
infrared filter light lens (13).
7
Remove headlamp cover nonmetallic seal
(15) from headlamp cover (3).
Remove three machine screws (16), three
8
Iockwashers (17), and headlamp blackout
lamp guard (18) from headlamp cover (3).
Remove blackout shield nonmetallic seal
9
(19) from headlamp blackout lamp guard
(18).
10
Remove two machine screws (20), two
Iockwashers (21), blackout lens retainer
(22), gasket (23), light filter (24), gasket
(25), headlamp blackout light lens (26),
and gasket (27) from headlamp blackout
lamp guard (18).
2-602
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |