INSPECTION/REPAIR - TM-9-2350-238-20-10601

TM 9-2350-238-20-1

16 Remove two machine screws (30), two lockwashers (31), and generator charge warning light

(27) from instrument panel (5).

NOTE

Steps 17 thru 20 are written for one panel light, but apply to both panel lights.

17 Tag and disconnect electrical leads at connectors (32) of panel light (33).

18 Remove two machine screws (34), two Iockwashers (35), and panel light (33) from instrument

panel (5).

19 Remove cap (36), light emitting diode (LED) (37), and flat washer (38) from socket housing

(39).

20 If damaged, remove electrical wires (40).

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 Warning lights are repairable assemblies. Refer to page 2-579.

3 For repair of electrical shell connectors, refer to general maintenance, page 2-371.

4 Electrical wire is a manufactured item, refer to appendix D.

5 If damaged or missing, replace marker bands. Etch or stamp lead number on new band.

6 For further disassembly, notify direct support maintenance.

7 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1) which do not meet

inspection criteria.

2-575