 |
|||
|
|
|||
|
Page Title:
MAINTENANCE OF RADIATOR SUPPORT BEAM AND RELATED PARTS. |
|
||
| ||||||||||
|
|
 TM 9-2350-238-20-1
15
Slide hose (35) with two hose clamps (36) onto radiator pressure equalizing metallic tube (6) so
that hose is evenly positioned on the radiator to surge tank metal tube assembly (5) and
radiator pressure equalizing metallic tube. Tighten hose clamps.
16
Install preformed hose (37) with two hose clamps (38) and tighten hose clamps.
17
Install preformed hose (39) with two hose clamps (40) and tighten hose clamps.
18 Install preformed hose (41) with two hose clamps (42) and tighten hose clamps.
19
Install nonmetallic hose (43) with two hose clamps (44) and tighten hose clamps.
20
Install radiator support beam. Refer to page 2-525.
21
Install hull engine compartment deck assembly lid. Refer to page 2-935.
22
Fill cooling system. Refer to TM 9-2350-238-10.
23
Run engine long enough to check for leaks. If leaks exist, check that all parts are correctly
installed. If leaks still exist, inspect for defective parts.
2-60. MAINTENANCE OF RADIATOR SUPPORT BEAM AND RELATED PARTS.
This task covers:
d.
Reassembly
a.
Removal
e.
Installation
b.
Disassembly
c.
Inspection/Repair
INITIAL SETUP
Nonmetallic seal (2)
Tools and Special Tools
Self-locking nut (6)
Automotive maintenance and repair shop
Spring pin (2)
equipment: organizational maintenance,
common no. 1(less power) (item 80,
References
Torque wrench (0 to 170 ft-lb)
TM 9-23350-238-24P-1
Materials/Parts
Equipment Conditions
2-935 Hull engine compartment deck
Adhesive (item 4, appx C)
assembly lid removed
Lockwasher
Lockwasher (2)
Lockwasher (10)
2-525
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals