Inspection/Repair - TM-9-2350-238-20-10529

TM 9-2350-238-20-1

23 Remove hexagon plain nut (65), Iockwasher (66), and hexagon head capscrew (67), and

disconnect rigid connecting link (68).

24 Remove hexagon plain nut (69), flat washer (70), and throttle pedal remote control Iever (71).

25 Loosen two hexagon plain nuts (72) at ends of rod tube (73).

26 Remove two hexagon plain nuts (72) and two rod end plain bearings (74) from ends of rod tube

(73).

27 Remove self-locking nut (75), flat washer (76), and sleeve bearing (77).

28 Remove shouldered shaft (78) and sleeve bearing (79) from transmission and governor linkage

bell crank (30).

1 Inspect for broken, damaged, or missing parts.

2 If governor control rod is broken, damaged, or missing, repair is by replacement of next higher

assembly.

3 If rod tube is broken, damaged, or missing, repair is by replacement of next higher assembly.

4 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

2-503