|
|
TM 9-2350-238-20-1
1 Remove fuel filter cover bolt (1) and
gasket (2) from filter cover (3).
2 Remove filter shell assembly (4).
3 Remove and discard gasket (5) and filter
element (6) from filter shell assembly (4).
1 Inspect for broken, damaged, or missing
parts.
2 Clean filter shell assembly and filter cover
with dry cleaning solvent.
3 Dry parts with low-pressure compressed
air.
4 Repair is by replacement of authorized
parts (TM 9-281 5-202-24P).
1 Install new gasket (1) and new filter
element (2) in filter shell assembly (3).
NOTE
Ensure that drain cock is closed.
2 Fill filter shell assembly (3) approximately
1.0 in. (2.5 cm) from top with fuel.
3 Install filter shell assembly (3) on filter
cover (4) using new gasket (5) and fuel
filter cover bolt (6).
2-477
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |