FUEL FILTER HEATER CIRCUIT. (Cont) - TM-9-2350-238-20-10341

TM 9-2350-238-20-1

Make sure MASTER switch is OFF before repairing

electrical circuits. Failure to observe this warning

could result in injury to personnel.

Disconnect ground lead. Place red probe in ground lead terminal. Ground

Step 16.

black probe. Set MASTER switch ON. Set fuel filter heater switch ON. If

multimeter indicates about 24 volts, repair ground lead. Refer to page

2-371. If multimeter indicates no voltage, replace fuel filter heater. Refer

to page 2-1025. Set MASTER switch OFF. Set fuel filter heater switch

OFF. Connect lead.

2-315