|
|
TM 9-2350-238-20-1
2-12. ELECTRICAL CIRCUIT TROUBLESHOOTING (CONT).
Make sure MASTER switch is OFF before repairing
electrical circuits. Failure to observe this warning
could result in injury to personnel.
Disconnect lead 480 from purge and PRIME ENGINE FUEL FILTERS/
Step 4.
HEATER FUEL CYCLE ON AND OFF switch. Place red probe in lead 480.
Ground black probe. Set MASTER switch ON. If multimeter indicates
about 24 volts, go to step 5. If multimeter indicates no voltage, repair lead
480 between circuit breaker and PRIME ENGINE FUEL FILTERS/HEATER
FUEL CYCLE ON AND OFF switch. Refer to page 2-371. Set MASTER
switch OFF. Connect lead.
2-300
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |