|
|
TM 9-2350-238-20-1
AZ. MAGNETIC CLUTCH AND BYPASS SOLENOID VALVE CIRCUIT (BYPASS SOLENOID
VALVE).
To access bypass solenoid valve, remove hull engine compartment deck
Step 1.
assembly lid. Refer to page 2-935. Disconnect connector from bypass
solenoid valve. Place red probe in socket A (lead 317A). Ground black
probe. Set MASTER switch ON. Set HYD PUMP/PTO CLUTCH switch
ON. If multimeter indicates about 24 volts, go to step 2. If multimeter
indicates no voltage, go to step 3. Set MASTER switch OFF. Set HYD
PUMP/PTO CLUTCH switch OFF. Connect connector.
2-289
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |