HI BEAM IND LIGHT (BLACKOUT) CIRCUIT. (Cont)

TM 9-2350-238-20-1

Place red probe on receptacle pin N (lead 519). Place black probe on

Step 3.

receptacle pin M (lead 519). If multimeter indicates about 100 ohms,

replace headlamp dimmer switch. Refer to page 2-584. If multimeter does

not indicate about 100 ohms, repair HI BEAM IND light. Refer to page

2-571. Connect wiring harness.

Disconnect connector from headlamp dimmer switch. Place red probe on

Step 4.

pin B. Place black probe on pin D. If multimeter indicates 0 ohms, repair

lead 519 between headlamp dimmer switch and instrument (gage) panel

wiring harness receptacle. Refer to page 2-371. If multimeter indicates

infinity, replace headlamp dimmer switch. Refer to page 2-584. Connect

connector to headlamp dimmer switch.

2-269