|
|
TM 9-2350-238-20-1
Step 1.
Start engine and run at 1000 to 1200 rpm. Note pressure reading on
ENGINE OIL PRESS indicator and stop engine. If ENGINE OIL PRESS
indicator reads at or near 0 psi (0 kPa), go to step 2. If ENGINE OIL
PRESS indicator reads about 40 psi (276 kPa), go to step 5.
To access engine oil low-pressure warning switch, open fuel filter access
Step 2.
door. Set MASTER switch OFF. Place red probe on engine oil low-
pressure warning switch metal case. Ground black probe. If multimeter
indicates resistance, go to step 3. If multimeter indicates infinity, clean
surface area between engine oil low-pressure warning switch and engine
for a good metal-to-metal contact.
2-189
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |