CHAPTRE 5 DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

TM 9-2330-202-14&P

CHAPTER 5

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

Section I. AXLE MAINTENANCE

5-1.

AXLE REPLACEMENT.

This Task Covers:

Removal

b. Installation

Initial Setup:

Tools/Test Equipment:

Equipment Conditions:

General mechanic's tool kit (Item 1, Appendix B)

Shock absorbers removed (para 4-54).

Field maintenance tool set (Item 5, Appendix B)

Hydraulic brake lines removed from axle (para 4-39).

Service brakes removed (para 4-34).

Materials/Parts:

Self-locking nut (8), MS21044-N8

Personnel Required: Two

WARNING

Use extreme caution when handling heavy parts. Lifting device is required when parts weigh

over 50 pounds (23 kg) for a single-person lift, over 100 pounds (45 kg) for a two-person lift,

and over 150 pounds (68 kg) for a three-person or more lift. Keep clear of heavy parts

supported only by lifting device. Failure to follow this warning may result in serious injury or

death to personnel.

NOTE

Replacement of axle is the same for all models. This procedure shows replacement of the M116A2 axle.

REMOVAL

Block and support frame securely, front and rear.

5-1