CLEANING AND INSPECTION cont'd

TM 9-2330-202-14&P

4-54.

SPRING ASSEMBLY REPLACEMENT (continued).

6. Install bumper (5) on spring assembly (6). Install two U-bolts (4) into grooves of bumper (5) and through holes in

spring plate (26).

7. Install four washers (3) and new self-locking nuts (2) on two U-bolts (4).

8. Tighten slotted nuts (22, 12, and 18).

9. Align holes for three cotter pins (17, 21, and 11 ) with slots in slotted nuts (22, 12, and 18) and install three new cotter

pins (17, 21, and 11).

10. Install new lubrication fitting (23) in each of three shackle pins (19, 20, and 13).

11. Install screw (7) into handbrake cable clip (8) on frame (9) and tighten.

FOLLOW-ON TASKS:

Lubricate shackle pins (Appendix I).

Install wheel and tire assembly (para 4-44).

4-107