 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-202-14&P
4-51.
ADJUSTABLE FRONT SUPPPORT LEG REPLACEMENT (CONTINUED).
b.
CLEANING AND INSPECTION
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective gog-
gles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open
flame or excessive heat.
1.
Clean all removed components with drycleaning solvent and rag and allow to dry.
2.
Inspect all components for wear, cracks, broken welds, or corrosion. Replace if damaged.
c.
INSTALLATION
1.
Fill cavity of adjustable front support leg (4) with grease. Install cap (12) on adjustable front support
leg (4) with two screws (11).
2.
If removed, install new cotter pin
(9) on chain (10).
3.
Pull out release lever (6) and
position adjustable front support
leg (4) at drawbar bracket assem-
bly (5). Push in release lever to
hold leg.
4.
Install capscrew (3) and new self-
locking nut (2) on adjustable front
support leg (4) and drawbar
bracket assembly (5).
5.
Use handcrank (7) to make sure
adjustable front support leg (4) is
in fully lowered position. Push in
release lever (6) to lock it in posi-
tion.
6.
Stow handcrank (7) on stowage
bracket (8) with cotter pin (9).
7.
Remove jackstands from both
drawbars (1).
438-105
FOLLOW-ON TASKS:
None
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals