|
|
TM 9-2330-202-14&P
4-43.1. HUB, BRAKEDRUM, AND WHEEL BEARINGS MAINTENANCE (M101A1 AND
M116A1).
This Task Covers:
a.
Removal
b. Disassembly
c.
Cleaning and Inspection
d. Installation
e.
Assembly
f.
Wheel Bearing Adjustment
Initial Setup:
Tools/Test Equipment:
Gasket, 7339403
Lockwasher (6), MS35338-47
General mechanic's tool kit (Item 1, Appendix B)
Seal, 2310
Common No. 1 tool set (Item 2, Appendix B)
Equipment Conditions:
Materials/Parts:
Wheel and tire assembly removed (para 4-44)
Cloth, abrasive (Item 3, Appendix F)
Handbrakes released (para 2-10)
Grease (Item 7, Appendix F)
References:
Rag (Item 13, Appendix F)
TM 9-214
Solvent, drycleaning (Item 15, Appendix F)
a.
REMOVAL
WARNING
DO NOT handle brakeshoes, brakedrums, or other components unless area
has been properly cleaned. Asbestos dust, which can be dangerous if you
touch it or breathe it, may be on these components. Failure to follow this
warning may result in serious illness or death to personnel.
1.
Raise trailer with jack. Position a suitable jackstand under axle. Lower and remove jack.
2.
Remove six cap screws (1), lockwashers (2), access cover (3), and paper gasket (4). Discard lock-
washers and paper gasket.
3.
Remove outer bearing sleeve nut (5), key washer (6), adjusting nut (7), outer bearing hub cone and
roller (8), and wheel hub and brakedrum assembly (9).
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |