 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-202-14&P
4-39.
MASTER CYLINDER REPLACEMENT (continued).
2.
Inspect boot for tears. Replace if damaged.
3.
Inspect master cylinder and mounting hardware for cracks, damaged threads, or other damage. Replace if damaged.
c.
INSTALLATION
NOTE
For trailers with master cylinder cap, do steps 1 and 2. For trailers with drain hose, do steps 3 and 4.
1.
Install gasket (14) and cap (13) on master cylinder (3).
2.
Install fluid passage bolt (10), washer (11), connector (2), and washer (12) on master cylinder (3).
3.
Install gasket (20), baffle (19), filler cap (18), and vent tube (17) on master cylinder (3).
4.
Install drain hose (16) on vent tube (17) and tighten clamp (15).
NOTE
On newer-model trailers, spacers are welded to inside of channel.
5.
Position boot (8), master cylinder (3), and four spacers (6) in channel (7) with boot (8) engaged inside hydraulic brake
actuator assembly (9). Install two capscrews (5) and new self-locking nuts (4) on master cylinder (3). Torque self-
locking nuts between 10 and 15 Ib-ft (14-20 Nom).
6.Connect hydraulic brake front tube assembly (1) to connector (2) at master cylinder (3).
FOLLOW-ON TASKS:
Service master cylinder (Appendix I).
Bleed hydraulic brake system (para 4-41).
4-75
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals