 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-202-14&P
4-38.
HYDRAULIC BRAKE ACTUATOR ASSEMBLY REPLACEMENT (CONTINUED).
NOTE
On newer-model trailers, spacers are
welded to inside of channel.
10.
Position master cylinder (8) and four
spacers (34) in channel (31) with boot
(48) engaged in pushrod (45). Install two
capscrews (33) and new self-locking
nuts (32) on master cylinder (8). Torque
self-locking nuts between 10 and 15 Ib-ft
(14-20 Nm).
438-086
e.
INSTALLATION
1.
Install hydraulic brake actuator assembly (5) on drawbar bracket assembly (15) with two new lock-
washers (28) and capscrews (27). Torque capscrews between 44 and 54 lb-ft (60-73 Nm). Install two
capscrews (26), new lockwashers (25), and nuts (24) on drawbar bracket assembly (15). Torque
nuts between 106 and 120 lb-ft (144-163 Nm).
438-082
4-70
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals