|
|
TM 9-2330-202-14&P
SERVICE BRAKE MAINTENANCE.
This Task Covers:
a.
Removal
b.
Disassembly
c.
Cleaning and Inspection
d.
Assembly
e.
Installation
Initial Setup:
Tools/Test Equipment:
Clamp, 11686281
General mechanic's tool kit (Item 1, Appendix B) Lockwasher, MS35335-34
Common No. 1 tool set (Item 2, Appendix B)
Lockwasher (5), MS35338-46
Materials/Parts:
Equipment Conditions:
Rag (Item 13, Appendix F)
Hub and brakedrum removed (para 4-43).
Solvent, drycleaning (Item 15, Appendix F)
a.
REMOVAL
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake components unless area has been
properly cleaned. Asbestos dust, which can be dangerous if you touch it or breathe it, may be on
these components. Wear an approved filter mask and gloves. NEVER use compressed air or a
dry brush to clean brake components. Dust may be removed using an industrial-type vacuum
cleaner. Clean dust or mud away from brake components with water and a wet, soft brush or
cloth. Failure to follow this warning may result in serious illness or death to personnel.
NOTE
It is not necessary to remove backing plate and service brake assembly from axle in order to disassemble
service brake assembly. Disassembly may be performed with service brake assembly on axle or on work
bench.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |