INTERVEHICULAR CABLE REPLACEMENT - TM-9-2330-202-14-P0136

TM 9-2330-202-14&P

4-30.

INTERVEHICULAR CABLE REPLACEMENT.

This Task Covers:

a. Removal

b. Installation

Initial Setup:

Tools/Test Equipment:

Self-locking nut, MS51922-21

General mechanic's tool kit (Item 1, Appendix B)

Equipment Conditions:

Materials/Parts:

Intervehicular cable disconnected from

Tag, marker (as needed) (Item 16, Appendix F)

towing vehicle (para 2-15).

Lockwasher (7), MS45904-64

NOTE

Configuration of intervehicular cable and mounting varies slightly with model.

REMOVAL

Remove four screws (1) and lockwashers (2) and cover (3) from junction box (4) at road-side drawbar (5).

Discard lockwashers.

NOTE

If marker bands are missing or illegible, tag wires for installation purposes (para 4-21).

At junction box (4) at road-side drawbar (5), remove chassis wiring harness connectors (6) and intervehicular

cable connectors (7) from clips (8) and disconnect connectors (6 and 7).

Remove screw (9), lockwasher (10), and ground terminal (11) from road-side drawbar (5). Discard lockwasher.

Remove two screws (12) and lockwashers (13) and retaining strap (14) from intervehicular cable (15) and road-

side drawbar (5). Discard lockwashers.