|
|
TM 9-2330-202-14&P
This task covers:
a.
Lamp Replacement
d. Cleaning and Inspection
b.
Stoplight Removal
e. Stoplight Assembly
c.
Stoplight Disassembly
f.
Stoplight Installation
Initial Setup:
Tools/Test Equipment:
Tag, marker (as needed) (Item 16, Appendix F)
Lockwasher (2), MS35338-42
General mechanic's tool kit (Item 1, Appendix B)
Packing, preformed, 7320658
Materials/Parts:
Starwasher (2), 23E06
Cloth (Item 4, Appendix F)
Equipment Conditions:
Intervehicular cable disconnected from towing
Detergent (Item 5, Appendix F)
vehicle (para 2-15).
Rag (Item 13, Appendix F)
References:
Solvent, drycleaning (Item 15, Appendix F)
TM 43-0139
a.
LAMP REPLACEMENT
NOTE
Screws (1) are held in lens retainer (2) by retainers (3).
1.
Loosen six screws (1) and remove lens retainer (2) and preformed packing (4). Discard preformed
packing.
2.
Remove lamp (5) and two lamps (6) from sockets (7) by pushing in and turning counterclockwise.
3.
Install two lamps (6) and lamp (5) in sockets (7) by pushing in and turning clockwise.
4.
Install new preformed packing (4) and lens retainer (2) and tighten six screws (1).
438-012
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |