|
|
TM 9-2330-202-14&P
4-28.
COMPOSITE STOPLIGHT-TAILLIGHT MAINTENANCE (CONTINUED).
NOTE
If lamps are present, perform step 4.
If LEDs are present, perform steps 5 and 6.
4.
Remove two lamps (8) from sockets (9) by pushing in and turning counterclockwise.
5.
Insert small flat-tipped screwdriver into slot inside center hole in LED (10). Push in firmly, turn coun-
terclockwise, and remove LED (10) from socket (9).
6.
Insert small flat-tipped screwdriver into slot on left side of LED (11) and open LED cover, allowing
access to inside slot in center hole. Push in firmly with screwdriver in center hole slot, turn counter-
clockwise slightly, and remove LED (11) from socket (9).
NOTE
LEDs can be used to replace lamps that were removed.
To install LEDs, perform step 1.
To install lamps, perform step 2.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |