AT HALT/PARKING.

TM 9-2330-202-14&P

2-24.

AT HALT/PARKING.

For short shutdown periods, park in a sheltered spot out of the wind. For long shutdown periods, prepare a footing

of planks or brush if high, dry ground is not available.

Remove all buildup of ice and snow as soon as possible after shutdown.

Cover trailer with canvas cover assembly or tarpaulin, keeping the ends of the canvas off the ground to prevent

freezing.

FORDING.

Refer to operating instructions in towing vehicle technical manual for information about fording operations.

Fording depth of the M101 and M116 Series trailers is limited to 30 inches (76.2 cm).

If tactical situation permits, perform the following services immediately after fording the trailer:

WARNING

Drycleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles and gloves, and use

only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOT breathe vapors.

DO NOT use near open flame or excessive heat.

(1) Notify Unit maintenance to remove wheel and rim assemblies and clean them thoroughly with drycleaning

solvent (Item 15, Appendix F). Dry all working components of handbrakes and wheel bearings. Lubricate

handbrakes and underbody (Appendix I).

(2) Immersion in saltwater greatly increases rusting and corrosion, especially on unpainted surfaces. Remove all

traces of saltwater and salt deposits from all areas of the trailer. Apply grease (Item 7, Appendix F) to exposed

areas of trailer. Notify Unit maintenance that complete disassembly and assembly may be needed.