|
|
TM 9-2320-387-24P C02
0001 00
STOCK NUMBER Column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and CAGEC columns to the left
FIG. Column. This column lists the number of the figure where the item is identified/located in the repair
parts list and special tool list work packages.
ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced
in the adjacent figure number column.
SPECIAL INFORMATION
USABLE ON CODE. The usable on code appears in the lower left corner of the Description column
heading. Usable on codes are shown as "UOC: . . . . . . ." in the Description Column (justified left) on the
first line applicable item description/nomenclature. Uncoded items are applicable to all models. Identification
of the usable on codes used in the RPSTL are:
Code
Used On
Code
Used On
XAA
M1113
TTT
M1151
XBB
M1114
UUU
M1152
Fabrication Instructions. Bulk materials required to manufacture items are listed in the Bulk Material
Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description
column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions
for items source code to be manufactured or fabricated are found in TM 9-2320-387-24.
Assembly Instruction. Detailed assembly instructions for items source coded to be assembled from
component spare/repair parts are found in TM 9-2320-387-24. Items that make up the assembly are listed
immediately following the assembly item entry or reference is made to an applicable figure.
Kits. Line item entries for repair parts kits appear in group 9401 KITS in the repair parts list work
packages.
Index Numbers. Items which have the word BULK in the figure column will have an index number shown
in the item number column. This index number is a cross-reference between the National Stock Number/Part
Number Index and the bulk material list in the repair parts list work packages.
Associated Publications. The publications listed below pertain to the M1113, M1114, M1151, and M1152
Expanded Capacity Vehicles (ECV) and their components:
TM 9-2320-387-10
Operator's Manual
TM 9-2320-387-10HR
Hand Receipt, Operator's Manual
TM 9-2320-387-24
Unit, Direct Support, and General Support Maintenance Manual
Illustrations. Item numbers on illustrations have been assigned in clockwise sequence, starting at
the 11 o'clock position (upper left).
BOI. The Basis of Issue (BOI) for the tools listed in section III of this RPSTL is as follows:
Level
Unit Description
BOI
{
Unit (O)
Maintenance unit, section or team (authorized a common
1
{
tool set)
Company/System Support Team
(except the following)
1
Motorized Division.Heavy Division
Heavy Maintenance Co.
2
Direct Support (DS)
Airborne/Assault Division
Forward Support Co.
2
Heavy Maintenance Co.
3
Light Infantry Division
Heavy Maintenance Co.
6
Light Maintenance Co.
0
{
General Support (GS)
Maintenance Co.
1
Heavy Equipment Maintenance Co.
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |