FRONT WINCH

TM 9-2320-386-10

Table 3-1. Troubleshooting (Contd).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

FRONT WINCH

WARNING

Wear hand protection when handling winch cable.

Broken wires may cause injury to personnel.

22. WINCH DRUM DOES NOT TURN OR PAY OUT CABLE

Step 1. Check hydraulic reservoir oil level (para. 3-7).

If low, add oil (table 2-2).

Step 2. Check to see if drum lock knob is engaged.

Pull out drum lock knob, rotate it a quarter of a turn clockwise, and

release into a shallow slot on nut (para. 2-18).

Step 3. Check to see if cable is binding.

Free cable from drum.

Step 4. Check if winch clutch control lever is engaged.

Move winch clutch control lever to proper position (para. 2-18).

END OF TESTING!

COOLING SYSTEM

WARNING

Extreme care should be taken when removing surge

tank filler cap if temperature gauge reads above

160F (71C). Contact with steam or hot coolant

under pressure may result in injury to personnel.

23. ENGINE TEMPERATURE EXCEEDS 230F (110C)

Step 1. Check coolant level (para. 3-7).

If low, add coolant.

Step 2. Check engine oil level (para. 3-7).

If low, add oil (table 2-2).

Step 3. Check for leakage from radiator, surge tank hoses, and hose

connections.

If loose, tighten. If still leaking, notify unit maintenance.

Step 4. Check transmission oil cooler for leaks.

If leaking, notify unit maintenance.

Change 1

3-11