Table 3-1. Troubleshooting.

TM 9-2320-386-10

3-3. TROUBLESHOOTING SYMPTOM INDEX (Contd)

TROUBLESHOOTING

MALFUNCTION

PROCEDURE

NO.

PAGE

SPECIAL PURPOSE KITS (Contd)

38.

Engine oil pan shroud not receiving heat

(power plant heater only). . . . . . . . . . .

.....................

3-17

39.

Engine coolant system not receiving heat

(power plant heater only). . . . . . . . . . .

.....................

3-17

DEEPWATER FORDING KIT

40.

Fording control handle inoperative . . . . .

.....................

3-17

A-FRAME KIT

41.

Winch inoperative

...............

.....................

3-18

42.

A-frame inoperative or misaligned . . . . . .

.....................

3-18

Table 3-1. Troubleshooting.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

NOTE

If corrective action does not correct malfunction, noti-

fy unit maintenance.

ENGINE

1. ENGINE STARTER SWITCH IS ENGAGED BUT ENGINE FAILS TO START

Step 1. Check to see if accessory/battery switch is off.

If off, turn accessory/battery switch on (para. 2-3).

Step 2. Check battery gauge for proper battery voltage (para. 2-3).

Service batteries if gauge does not display proper voltage (para. 3-10).

Step 3. Visually check to see if battery cables, terminals, and connections

are loose, broken, or corroded. Check battery for proper water level.

If loose, broken, corroded, or if battery water level is low, notify unit

maintenance.

Step 4. Ensure transmission is in neutral (para. 2-15).

END OF TESTING!

3-4