CHAPTER 2 OPERATING INSTRUCTIONS - TM-9-2320-386-100041

TM 9-2320-386-10

CHAPTER 2

OPERATING INSTRUCTIONS

Section I.

Description and Use of Operator's Controls and Indicators (page 2-1)

Section II.

Operator Preventive Maintenance Checks and Services (PMCS)

Section III. Operation Under Usual Conditions (page 2-48)

Section IV. Operation Under Unusual Conditions (page 2-78)

Section V. Operation of Special Purpose Kits (page 2-91).

Section I. DESCRIPTION AND USE OF

OPERATOR'S CONTROLS AND INDICATORS

2-1. KNOW YOUR CONTROLS AND INDICATORS

Before you attempt to operate your equipment, ensure you are familiar with the

location and function of all controls and indicators. This section describes the loca-

tion and function of all controls and indicators.

________

_W__NI___

_ AR _ NG

Hearing protection is required when maintaining vehicle with

engine running.

NOTE

Except where specifically noted, the controls and indicators in this

section are generally applicable to all vehicles covered in this

manual.

In this manual, the term "left" indicates the driver's side of the

vehicle. The term "right" indicates the crew's side of the vehicle.

2-2. PREPARATION FOR USE

When a vehicle is received by the using organization, it is the responsibility of the

officer-in-charge to determine whether it has been properly prepared for service by the

supplier. It is the responsibility of the officer-in-charge to ensure the vehicle is in condi-

tion to perform its functions. Maintenance personnel will provide any additional service

required to bring the vehicle to operating standards. Before operating the vehicle, the

operator must become familiar with the vehicle controls and indicators as described in

this chapter.

2-1