 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
b. Installation
(1) Position air pressure gage (1) on panel
(2).
(2) Install clamp (3) and wire no. 1435 (4) on
gage (1) with two new lockwashers (5)
and nuts (6).
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and Is harmful to skin and
clothing. To avoid Injury or death,
keep away from open fire and use In
well ventilated area. If pipe thread
sealing compound gets on skin or
clothing, wash Immediately with soap
and water.
CAUTION
Use pipe thread sealing compound
sparingly only on pipe threads. Do
not apply pipe thread sealing
compound to hose connections.
Damage to equipment may result.
(3) Coat threads of gage (1) with pipe thread
sealing compound.
(4) Install two fittings (7) on gage (1).
(5) Install hose no. 2041 (8) and hose no.
2610 (9) on two fittings (7).
(6) Install lamp (10) and socket (11) as one
unit in gage (1).
(7) Install panel (2) on dash (12) with four
screws (13).
c. Follow-On Maintenance
(1) Start engine (TM 9-2320-360-10).
(2) Build up air pressure to 120-125 psi (827-
862 kPa).
(3) Shut off engine (TM 9-2320-360-10).
(4) Check for leaks (TM 9-2320-360-10).
(5) Remove wheel chocks.
20-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
