 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
(8) Remove three screws (12) and foil (13)
from blower housing (7).
(9) Remove three screws (14), ground wire
(15), lockwasher (16), and foil (17) from
blower housing (7). Discard lockwasher.
(10) Remove two retaining dips (18) from
blower wheels (19).
NOTE
Tag and mark position of blower
wheels and housing before removal.
(11) Remove two blower wheels (19) from
motor (20).
(11.1) Remove two retaining clips (18.1) from
two blower wheels (19).
(12) Remove screw (21), washer (22),
retaining strip (23), and cushion (24) from
blower housing (7).
(13) Remove caged nut (25) from blower
housing (7).
(14) Remove motor (20) from blower housing
(7).
NOTE
Do steps (15) and (16) only if foam
strips fail inspection.
(15) Remove two foam strips (26) from blower
housing (7).
(16) Remove foam strip (27) from housing (3).
Change 2 18-39
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
