2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
17-10. WINCH RESERVOIR REPAIR
This task covers:
a. Removal
d. Installation
b. Disassembly
e. Follow-On Maintenance
c. Assembly
INITIAL SETUP
Equipment Conditions
Materials/Parts
Hydraulic filter and housing removed
Sealant, Hydraulic (Item 29, Appendix C)
Ties, Cable, Plastic (Item 34, Appendix C)
Oil drained from reservoir (LO 9-2320-360-12).
Breather Assembly (Item 1, Appendix G)
Lockwashers (4) (Item 102, Appendix G)
Packings, Preformed (3) (Item 142, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Packing, Preformed (Item 138, Appendix G)
Wrench, Crow's Foot, 2-3/4 In. (Item 66,
Packing, Preformed (Item 140, Appendix G)
Packing, Preformed (Item 144, Appendix G)
Wrench, adjustable, automobile (Item 61.1,
Personnel Required
Two
a. Removal
(1) Remove adapter (1) and preformed
packing (2) from reservoir (3). Discard
preformed packing.
(2) Remove hose (4), adapter (5), and
preformed packing (6) from reservoir (3).
Discard preformed packing.
(3) Remove two hoses (7), elbows (8), and
preformed packings (9) from reservoir (3).
Discard preformed packings
NOTE
Location of plastic cable ties should
be marked before removal.
(4) Remove plastic cable tie (10) from drain
hose (11).
Change 1 17-19
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |