Installation - TM-9-2320-360-20-21135

TM 9-2320-360-20-2

17-9. HYDRAULIC FILTER AND HOUSING REPLACEMENT (CONT)

b. Installation

NOTE

OUT side of filter housing faces

toward reservoir.

(1) Install new preformed packing (1) and

filter housing (2) on adapter (3).

(2) Install new preformed packing (4) and oil

sampling valve (5) in adapter (6).

(3) Install new preformed packing (7) and

adapter (6) in filter housing (2).

(4) Connect hose (8) to adapter (6).

(5) Install new preformed packing (9) and

filter (10) on filter housing (2) by hand by

turning clockwise.

(6) Tighten filter (10) until preformed packing

(9) touches filter housing (2), then tighten

additional one-half turn.

c. Follow-On Maintenance

(1) Check reservoir oil level (TM 9-23 20-360-10).

(2) Start engine (TM 9-2320-360-10).

(3) Check for leaks.

(4) Shut off engine (TM 9-2320-360-10).

(5) Remove wheel chocks.

17-18