Installation - TM-9-2320-360-20-21131

TM 9-2320-360-20-2

17-7. WINCH CABLE HOLD DOWN VALVE REPLACEMENT (CONT)

b. Installation

WARNING

Pipe thread sealing compound can

burn easily, can give off harmful

vapors, and is harmful to skin and

clothing. To avoid Injury or death,

keep away from open fire and use in

well-ventilated area. If pipe thread

sealing compound gets on skin or

clothing, wash immediately with soap

and water.

CAUTION

Use pipe thread sealing compound

sparingly only on pipe threads. Do

not apply compound at hose

connections. Damage to equipment

may result.

(1) Coat threads of elbow (1), elbow (2), and

fitting (3) with pipe thread sealing

compound.

(2) Install elbow (1), elbow (2), and fitting (3)

on valve (4).

NOTE

Valve must be turned clockwise while

installing to route lever through slot

in winch console.

(3) Install valve (4) on winch console (5) with

two screws (6).

(4) Install air line (7) on fitting (3).

(5) Install air line (8) on elbow (2).

(6) Install air line (9) on elbow (1).

c. Follow-On Maintenance

Install winch control console front panel (para 17-8).

17-14