Follow-On Maintenance - TM-9-2320-360-20-21094

TM 9-2320-360-20-2

16-29. RIGHT FRONT FENDER/BRACKETS REPLACEMENT (CONT)

(5) Position rear fender bracket (18) on

muffler bracket (19) with four screws (20)

and new locknuts (21). Do not tighten.

(6) Install right front fender (2) on front fender

bracket (5) and center fender bracket (9)

with five screws (22), washers (23), and

new locknuts (24) with aid of assistant.

Torque to 22 lb-ft (29.8 N m) with 15-100

lb-ft torque wrench (25).

(7) Route wiring harness (26) through fender

(2).

(8) Install bumper (27) on right front fender (2)

with washer (28), new lockwasher (29),

and nut (30).

NOTE

Hood bumper bracket is slotted.

Bracket should be positioned toward

engine as far as possible.

(9) Install bumper bracket (31) on right front

fender (2) with two screws (32) and new

locknuts (33).

c. Follow-On Maintenance

(1) Install right front mud flap (para 16-6).

(2) Install right front reflector (para 16-23).

(3) Install right front fender marker lights (para

(4) Install right front composite light (para

(5) Install right headlight (para 7-39).

(6) Close engine hood (TM 9-2320-360-10).

(7) Install inner fender (par a 16-34).

16-118 Change 1