FRONT FENDER SIDE MARKER/TURN SIGNAL LIGHTS REPLACEMENT

TM 9-2320-360-20-2

7-41. FRONT FENDER SIDE MARKER/TURN SIGNAL LIGHTS REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Tools and Special Tools

Engine shut off (TM 9-2320-360-1 0).

Tool Kit, Genl Mech (Item 54, Appendix F)

Parking brake on (TM 9-2320-360-10).

Wheels chocked.

Materials/Parts

Locknuts (2) (Item 44, Appendix G)

Gasket (Item 38.1, Appendix G)

a. Removal

NOTE

Side marker and turn signal lights

are replaced the same way. Turn

signal is shown.

To remove lamp only, do steps (1)

and (2).

(1) Remove two screws (1), lens (2), and lens

holder (3) from marker light base (4).

(2) Remove lamp (5) from socket (6).

(3) Remove two locknuts (7), washers (8),

ground wire (9), screws (10), base (4),

and gasket (10.1) from front fender (11).

Discard lockwashers and gasket.

(4) Disconnect plug (12) from connector (13).

7-120 Change 2