2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
15-6. SHOCK ABSORBER BRACKET REPLACEMENT
This task covers:
Removal
Follow-On Maintenance
Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Shock absorbers removed (para 15-3).
Locknuts (8) (Item 63, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Wrench, Torque, 0-600 Lb-Ft (Item 74,
a. No. 1 Axle Bracket Removal
NOTE
Left and right shock absorber
brackets are replaced the same way.
Left side is shown.
Remove two locknuts (1), screws (2), and
bracket (3) from front crossmember (4). Discard
locknuts.
b. No. 1 Axle Bracket Installation
Install bracket (3) on front crossmember (4) with
two screws (2) and new locknuts (1). Torque to
380 lb-ft (515 Nm).
15-16
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |