Follow-On Maintenance - TM-9-2320-360-20-20651

TM 9-2320-360-20-2

(7) Install hose no. 2612 (10) on adapter (7).

(8) Install hose no. 2611 (11) on adapter (8).

(9) Install hose no. 2662 (12) on adapter (9).

(10) Install wire no. 1719B (13) and wire no.

1719C (14) on sending unit (6).

(11) Install valve (2) in panel (15) with four

screws (16).

(12) Install panel (15) on das h (17) with four

screws (18).

NOTE

Do step (13) if knobs were removed.

Both knobs are installed the same

way. Parking brake knob is shown.

(13) Install knob (19) on valve (2) with pin (20).

c. Follow-On Maintenance

(1) Start engine (TM 9-2320-360-10).

(2) Build up air pressure to 120-125 psi (827-862 kPa).

(3) Apply parking brake and check operation (TM 9-2320-360-10).

(4) Shut off engine (TM 9-2 320-360-10).

(5) Check for leaks.

(6) Remove wheel chocks.

11-57