Follow-On Maintenance - TM-9-2320-360-20-20645

TM 9-2320-360-20-2

WARNING

Pipe thread sealing compound can

burn easily, can give off harmful

vapors, and is harmful to skin and

clothing. To avoid injury or death,

keep away from open fire and use in

well-ventilated area. If pipe thread

sealing compound gets on skin or

clothing, wash immediately with soap

and water.

CAUTION

Use pipe thread sealing compound

sparingly only on pipe threads. Do

not apply compound to hose

connections. Damage to equipment

may result.

(7) Coat threads of fittings (10 and 11), elbow

(12), and tee (13) with pipe thread sealing

compound.

(8) Install fitting (10) on input side of valve (3).

(9) Install fitting (11) on output side of valve (3).

NOTE

Tee should be turned clockwise until

opening faces front of vehicle.

(10) Install tee (13) on no. 3 air reservoir (14).

(11) Install elbow (12) on tee (13).

(12) Install fitting (10) and valve (3) on tee (13).

(13) Turn tee (13) one-quarter turn clockwise

so fitting (10) and valve (3) are parallel

with no. 3 air reservoir (14).

(14) Install hose no. 2108 (15) on elbow (12).

(15) Install hose no. 2041 (16) on fitting (11).

c. Follow-On Maintenance

(1) Start engine (TM 9-2320-360-10).

(2) Build up air pressure to 120-125 psi (827-862 kPa).

(3) Shut off engine (TM 9-2320-360-10).

(4) Check for leaks.

(5) Remove wheel chocks.

11-51