Installation - TM-9-2320-360-20-20644

TM 9-2320-360-20-2

11-15. PRESSURE PROTECTION VALVE REPLACEMENT (CONT)

(8) Remove hose no. 2074 (9) from fitting (10).

(9) Remove two locknuts (11), screws (12),

and manifold (13) from mounting bracket

(14). Discard locknuts.

(10) Remove fitting (15) and valve (7) from

reducer (16).

(11) Remove two fittings (10 and 15) from

valve (7).

b. Installation

WARNING

Pipe thread sealing compound can

burn easily, can give off harmful

vapors, and is harmful to skin and

clothing. To avoid injury or death,

keep away from open fire and use in

well-ventilated area. If pipe thread

sealing compound gets on skin or

clothing, wash immediately with soap

and water.

CAUTION

Use pipe thread sealing compound

sparingly only on pipe threads. Do

not apply compound to hose

connections. Damage to equipment

may result.

NOTE

To install right valve, do steps (1)

thru (6). To install left valve, do steps

(7) thru (15).

(1) Coat threads of fittings (1 and 2) with pipe

thread sealing compound.

(2) Install fitting (1) on input side of valve (3).

(3) Install fitting (2) on out put side of valve (3).

(4) Install fitting (2) and valve (3) on reducer (4).

(5) Install manifold (5) on mounting bracket (6)

with two screws (7) and new locknuts (8).

(6) Install hose no. 2074 (9) on fitting (1).

11-50