2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
b. Installation
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and Is harmful to skin and
clothing. To avoid Injury or death,
keep away from open fire and use In
well-ventilated area. If pipe thread
sealing compound gets on skin or
clothing, wash immediately with soap
and water.
CAUTION
Use pipe thread sealing compound
sparingly only on pipe threads. Do
not apply compound to hose
connections. Damage to equipment
may result.
NOTE
Do steps (1) thru (9) only when
installing new brake chamber.
(1) Remove nut (1), washer (2), and tool (3)
from mounting position on brake chamber
(4).
(2) Remove dust cap (5) from access hole (6)
in brake chamber (4).
(3) Insert tool (3) in access hole (6) and align
with slot (7) inside brake chamber (4).
(4) Push tool (3) in slot (7) until it stops.
(5) Turn tool (3) 90 and pull out until it is
seated and stops.
(6) Install washer (2) and nut (1) on tool (3).
(7) Release brake chamber (4) by tightening
nut (1) down (clockwise) until it stops.
(8) Coat threads of fittings (8 and 9) with pipe
thread sealing compound.
CAUTION
Smaller fitting must be installed in
SPRING BRAKE port.
Failure to
comply will result in abnormal brake
operation.
(9) Install fittings (8 and 9) in brake chamber
(4).
11-17
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |