 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
11-6. REAR BRAKE CHAMBER REPLACEMENT (CONT)
(3) Insert tool (3) in access hole (6) and align
with slot (7) inside brake chamber (4).
(4) Push tool (3) in slot (7) until it stops.
(5) Turn tool (3) 90 and pull out until it is
seated and stops.
(6) Install washer (2) and nut (1) on tool (3).
(7) Release brake chamber (4) by tightening
nut (1) down (clockwise) until it stops.
NOTE
Tag and
mark air
lines
before
removal.
(8) Remove two air lines (8) from brake
chamber (4).
(9) Remove cotter pin (9), pin (10), and slack
adjuster (11) from clevis (12) of brake
chamber (4). Discard cotter pin.
(10) Push lock (13) in while turning adjusting
screw
(14)
counterclockwise
one
revolution.
(11) Loosen jamnut(15). Remove clevis (12)
from brake chamber (4).
(12) Remove two locknuts (16), washers (17),
and brake chamber (4) from mounting
bracket (18). Discard locknuts.
NOTE
Do step (13) only when installing new
brake chamber.
(13) Remove two fittings (19 and 20) from
brake chamber (4).
11-16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
