SLACK ADJUSTER (AUTOMATIC - AXLE NO. 1) REPLACEMENT

TM 9-2320-360-20-2

11-4.1. SLACK ADJUSTER (AUTOMATIC - AXLE NO. 1) REPLACEMENT

This task covers:

a. Removal

c. Installation

b. Plac ing in Service

d. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Materials/Parts

Engine shut off (TM 9-2320-360-10).

Pin, Cotter (Item 146, Appendix G)

Wheels chocked.

Pin, Cotter (Item 148, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 54, Appendix F)

Goggles, Industrial (Item 14, Appendix F)

Pliers, Snap Ring (Item 28, Appendix F)

a. Removal

(1) Remove cotter pin (1) and pin (2) from

slack adjuster (3). Discard cotter pin.

(2) Remove cotter pin (4) and pi n (5) from

slack adjuster (3) and clevis (6) on brake

chamber (7). Discard cotter pin.

(3) Turn adjusting screw (8) counterclockwise

one revolution.

11-10.2 Change 3