 |
|||
|
|
|||
|
Page Title:
BRAKE ADJUSTMENT (AUTOMATIC SLACK ADJUSTERS) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-20-2
11-2.1. BRAKE ADJUSTMENT (AUTOMATIC SLACK ADJUSTERS)
This task covers:
a. Adjustment
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Engine shut off (TM 9-2320-360-10).
Tool Kit, Genl Mech (Item 54, Appendix F)
Wheels chocked.
a. Adjustment
WARNING
All brakes must be adjusted when
performing
brake
adjustment
procedure. Failure to comply may
cause improper braking and result in
injury to personnel.
(1) Push in PARKING BRAKE control (1) to
release brakes.
NOTE
Brake linings will tighten against
inside of drum when adjusting
screw is turned clockwise.
Do steps (2) and (3) for axle No. 1.
Do steps (4) and (5) for axles No.
2, 3 and 4.
(2) Turn adjusting screw (2) on slack adjuster
(3) clockwise until tight.
NOTE
Each
1/4
turn
moves
lining
approximately 0.0025 in. (0.06 mm)
at center of shoe.
(3) Turn adjusting screw (2) on slack adjuster
(3) counterclockwise 1/4 turn.
11-2.2 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
