Table 10-1. Lockstrap Screw Torque Requirements

TM 9-2320-360-20-2

10-2. PROPELLER SHAFT AND UNIVERSAL JOINT REPAIR (CONT)

(8) Install two bearing caps (8) and retaining

wire (10) on universal joint (6).

(9) Install universal joint (6) on yoke (11).

(10) Install two bearing caps (9) on universal

joint (6) and yoke (11).

(11) Install new lockstrap (12) with two screws

(13) on each side of yoke (11). Torque to

values given in table 10-1.

(12) Bend jockstrap (12) over screws (13).

(13) Repeat steps (5) thru (12) for universal

joint on other end of propeller shaft (14).

Table 10-1. Lockstrap Screw Torque Requirements

Propeller Shaft

Torque Requirement

Transmission to Transfer Case

32-42 lb-ft (43-67 N⋅m )

Transfer Case to No. 1 Axle

17-24 lb-ft (23-33 N⋅m )

Transfer Case to No. 2 Axle

32-42 lb-ft (43-67 N⋅m )

No. 2 Axle to No. 3 Axle

32-42 lb-ft (43-67 N⋅m )

No. 3 Axle to No. 4 Axle

17-24 lb-ft (23-33 N⋅m )

10-6