 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
b. Installation
(1) Install bracket (1) on doghouse (2) with
four screws (3) and new locknuts (4).
NOTE
Cable adjustment is done on transfer
case end of cable. To ensure cable
has adequate threads on transfer
case end, thread yoke on cable 0.50
in. (13 mm).
(2) Loosely install nut (5) and yoke (6) on
cable (7).
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(2.1) Coat threads of two screws (11) with
adhesive-sealant.
(3) Install shift lever (8) and cable bracket (9)
on bracket (1) with two new lockwashers
(10) and screws (11).
(4) Position cable (7) in cable bracket (9).
(5) Align holes and install clevis pin (12) in
yoke (6) and shift lever (8).
(6) Install new cotter pin (13) in clevis pin (12).
(7) Tighten nut (14) on cable (7).
(8) Install knob (15) on shift lever (8).
c. Follow-On Maintenance
(1) Adjust two-speed shift linkage (para 9-2).
(2) Install shifter guar d (para 16-2).
Change 1 9-9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
