2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
9-3. SHIFT LEVER REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Shifter guard removed (para 16-2).
Adhesive-Sealant (Item 6, Appendix C)
Locknuts (4) (Item 72, Appendix G)
Lockwashers (2) (Item 101, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Pin, Cotter (Item 148, Appendix G)
a. Removal
(1) Remove knob (1) from shift lever (2).
(2) Loosen nut (3) on cable (4).
(3) Remove coffer pin (5) from clevis pin (6).
Discard cotter pin.
(4) Remove clevis pin (6) from yoke (7) and
shift lever (2).
(5) Loosen nut (8) and remove cable (4) from
cable bracket (9).
(6) Remove two screws (10), lockwashers
(11), and cable bracket (9) from bracket
(12). Discard lockwashers.
(7) Remove shift lever (2) from bracket (12)
and doghouse (13).
(8) Remove yoke (7) and nut (3) from cable
(4).
(9) Remove four locknuts (14), screws (15),
and bracket (12) from doghouse (13).
Discard locknuts.
9-8 Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |